TDK Ventures supports metal additive manufacturing start-up Fabric8Labs


– Fabric8Labs, an additive manufacturing company, prints high precision metal parts using a proprietary process that eliminates expensive metal powders and energy-hungry thermal processes typical of current market offerings, and focuses on initial applications which include semiconductors, antennas (5G), electronics, medical devices and thermal management.

– TDK will help accelerate Fabric8Labs’ vision of bringing high-precision mass-produced parts to market at a lower cost than existing methods through its deep expertise in electronic component manufacturing, materials science and MEMS fabrication.

SAN JOSE, California, July 20, 2021 / PRNewswire / – TDK Corporation (TSE: 6762) today announced that its subsidiary TDK Ventures Inc. will support Fabric8Labs, marking its second investment in additive manufacturing and the first in metal printing.

Fabric8Labs has developed a proprietary process which is different from other metal additive fabrications (3D printing) – it does not require the use of expensive metal powders. Their process is ideally positioned to produce precision metal parts that are suitable for mass production and at a lower cost than traditional 3D printing approaches. Fabric8Labs proprietary process has a smaller environmental footprint than other metallic 3D printing processes, aligning with TDK Ventures’ focus on digital and energy transformation industry startups contributing to societal efforts and sustainable development.

Fabric8Labs initially targets the rapidly growing copper market, which is expected to reach 222 billion dollars in 20251, focusing on copper 3D printing for cooling applications in semiconductors, chip-scale manufacturing and RF / 5G components. Copper has recently been touted as the new “petroleum” due to its prevalence in electric vehicles and solid-state wiring. Fabric8Labs also samples additional metals and alloys for customers, opening up applications in everything from automotive tooling to medical.

“After nearly two years of research for a high purity, high precision and low cost metal printing solution, TDK Ventures supports Fabric8Labs for its unique approach to the market and its innovation pipeline with future multi-materials. “, said Nicolas Sauvage, Managing Director of TDK Ventures. “Fabric8Labs not only covers the explosive markets of electrification, thermal management and 5G applications, but also does so in an environmentally friendly manner by recycling all metals contained in the raw material, thus helping to create chains sustainable but resilient procurement, in line with our investment mission. “

Fabric8Labs proprietary metal 3D printing technology deposits metal atoms at the speed of industrial mass production processes. The process relies on proven technologies developed in the LED industry to produce metal parts with ultra-high precision in a software-defined manner.

“Fabric8Labs is delighted to collaborate with TDK Ventures during the next exciting phase of our business,” said Jeff Herman, CEO of Fabric8Labs. “Metal 3D printing is growing faster than any other 3D printing technique, and with our innovative technology, Fabric8Labs is well positioned to be a game-changer in the additive manufacturing market. With the support of TDK Ventures, we will both be able to accelerate our vision while playing an important role in TDK’s mission to focus on contributing to society through sustainability. “

Dr. Cyril Vancura, imec.xpand Fund, who led the seed cycle: “At imec.xpand, we are prepared to take the risk of early stage technology integration. Early on, we believed in the idea of ​​the founders of Fabric8 to combine the galvanic processes, known for centuries, with cutting-edge TFT backplane technology. We believe their innovative process will have many applications in the future and we look forward to continuing to work with the team and new investors to make this venture a success. “

“Schneider Electric is exploring very interesting applications of Fabric8Labs technology around high quality electrical connectors and thermal management inside data centers and within our electric mobility products,” said Grant Allen, Schneider Ventures, who also participated in Series A. “From both an industrial and energy management perspective, we are extremely excited about the potential of Fabric8Labs and believe we are just doing scratch the surface of use cases for this technology and additive manufacturing in general. “

Fabric8Labs was founded in 2015 in San diego, california, and is coming out of stealth mode after spending the last five years perfecting its proprietary technology. With the traction found in various industries, Fabric8Labs completed its A-Series increase this month of $ 19.3 million led by Intel Capital with participation from TDK Ventures announced today, as well as Lam Capital, Schneider Ventures, Stanley Black & Decker, and imec.xpand, Mark Cuban Companies. The funding will allow Fabric8Labs to accelerate the commercialization of its technology and bring the cost of metal additive manufacturing within reach of a much larger market.

To learn more about TDK Ventures, interested startups or investment partners can visit www.tdk-ventures.com or contact TDK Ventures at contact@tdk-ventures.com.

1 Copper Market Size 2021-2025 Global Industry Market Research Report

About TDK Corporation

TDK Corporation is a global leader in electronic solutions for the smart society based in Tokyo, Japan. Built on a basis of mastery of materials sciences, TDK welcomes societal transformation by remaining resolutely at the forefront of technological development and deliberately “Attracting Tomorrow”. It was established in 1935 to commercialize ferrite, a key material in electronic and magnetic products. TDK’s comprehensive and innovative portfolio includes passive components such as ceramic, electrolytic aluminum and film capacitors, as well as magnetic, high frequency, piezoelectric and protection devices. The product line also includes sensors and sensor systems such as temperature and pressure, magnetic and MEMS sensors. Additionally, TDK provides power supplies and devices, magnetic heads and more. These products are marketed under the product brands TDK, EPCOS, InvenSense, Micronas, Tronics and TDK-Lambda. TDK focuses on the demanding automotive, industrial and consumer electronics, as well as information and communication technology markets. The company has a network of design and manufacturing sites and sales offices in Asia, Europe, and in the North and South America. In fiscal year 2021, TDK recorded total sales of $ 13.3 billion and employed approximately 129,000 people worldwide.

About TDK Ventures

TDK Ventures Inc. invests in startups to drive innovation in materials science, energy / electricity and related fields typically under-represented in venture capital portfolios. Founded in 2019 as a wholly owned subsidiary of TDK Corporation, the vision of the venture capital firm is to propel digital and energy transformations in segments such as health and wellness, next generation transportation, robotics and industry, mixed reality and IoT / IIoT markets. TDK Ventures will co-invest and support promising portfolio companies by providing technical expertise and access to global markets where TDK operates. Interested startups or investment partners can contact TDK Ventures: www.tdk-ventures.com or contact@tdk-ventures.com.

About Fabric8Labs:

Fabric8Labs, Inc., based in San diego, california, revolutionizes metal additive manufacturing with its advanced 3D printing technologies. Founded in 2015, the company is at the forefront of advanced manufacturing and commercializes breakthroughs in materials science and processing – reducing manufacturing costs and supporting significant advancements in material quality and manufacturing capabilities. manufacturing. Fabric8Labs strives to expand the metal additive manufacturing market in all industries. For more information, visit Fabric8Labs.com.

You can download this text and associated images from https://www.tdk-ventures.com/tdk-ventures-backs-metal-addititve-manufacturing-startup-fabric8-labs

Cision

Show original content: https://www.prnewswire.com/news-releases/tdk-ventures-backs-metal-additive-manufacturing-startup-fabric8labs-301336821.html

SOURCE TDK Ventures


Source link

Previous New implementation service offer available for composites manufacturers through the RUAG and Virtek partnership.
Next Ericsson 5G increases Glanbia manufacturing efficiency